2007
Bartels, R. E. and Sayma, A. I. (2007) "Computational Aeroelastic Modeling of Airframes and TurboMachinery: Progress and Challengtes" Royal Society Philosophical Transaction: Mathematical, Physical & Engineering Sciences, Theme issue. 'Computational fluid dynamics in aerospace engineering' compiled by Paul G. Tucker, 365(1859), 2469-2499.
Childs, P.R.N. ESDU 06018. Temperature measurement. Thermocouples ESDU Heat Transfer Series Volume 4 (Insulation And Temperature Measurement) ISBN: 978 186 246 594 7, ISSN: 0141-402X, 2007
Childs, P.R.N. ESDU 06019. Temperature measurement. Resistance thermometry ESDU Heat Transfer Series Volume 4 (Insulation And Temperature Measurement) ISBN: 978 186 246 595 4 ISSN: 0141-402X, 2007
Childs, P.R.N. ESDU 07004. Flow in rotating components - discs, cylinders and cavities ESDU Fluid Mechanics, Internal Flow Series Volume 4c (Flow In Rotating Machinery) ISBN: 978 186 246 605 0 ISSN: 0141-4011, 2007
Cooke A., Childs P.R.N. and Long C.A., Evaluation of the effect of uncertainty in material properties on turbomachinery disc heat transfer using Monte Carlo simulation methods, Paper GT2007-27573, Proceedings of ASME Turbo Expo 2007: Power for Land, Sea and Air, May 14-17, 2007, Montreal, Canada.
Farahani, A. and Childs, P.R.N. Characterisation of Static Strip Seal Flow. ASME Paper GT2007-27469, ASME Turbo Expo, Montreal, Canada, May 14th - 17th, 2007.
G. A. Thomas, N. R. Atkins, S. J. Thorpe, R. W. Ainsworth, N. W. Harvey, "The effects of a casing step on the over-tip casing heat-transfer and static pressure in a Transonic turbine stage." ASME paper number GT2007-27780, Proceedings of Turbo Expo 2007, Montreal, Canada, 14-17 May, 2007.
Georgakis, C. Whitney,C. and Woollatt, G. Stefanis, V. Childs PRN turbine stator well CFD studies: effect of upstream egress ingestion. ASME Paper GT2007-27406, ASME Turbo Expo, Montreal, Canada, May 14th - 17th, 2007.
Hamilton, T., Morris, R. and Childs, P. 'Learning from Higher Arts Education in Designing Constructivist Learning Spaces: A Case Study of InQbate: The Centre of Excellence in Teaching and Learning in Creativity'. In Boddington, A. and Clews, D. (Editors) Teachers' Academy Papers: Proceedings of the 3rd ELIA Teachers' Academy, Brighton, England, 12-14th July 2007, Burlington Press, Cambridge, pp105 – 108
Long, C. A. and Childs, P. R. N. Shroud Heat Transfer Measurements Inside a Heated Multiple Rotating Cavity with Axial Throughflow. International Journal of Heat And Fluid Flow, Vol. 28, pp. 1405-1417, 2007.
Long, C. A., Miché N. D. D. and Childs, P. R. N. Flow Measurements Inside a Heated Rotating Multiple Cavity with Axial Throughflow. International Journal of Heat And Fluid Flow, Vol. 28, pp. 1391-1404, 2007.
Long, C.A. and Childs, P.R.N. The effect of inlet conditions on the flow and heat transfer in a multiple rotating cavity with axial throughflow. Journal of Aerospace Power, Vol. 22, No. 5, pp. 683-693, 2007.
Morris, R.D., Childs, P.R.N., and Hamilton, T. Sustainability by Design: A reflection on the suitability of pedagogic practice in design and engineering courses to the teaching of sustainable design. European Journal of Engineering Education, Vol. 32, No. 2, pp. 135-142, 2007.
N.R. Atkins, R. W. Ainsworth, "Turbine aerodynamic performance measurement under non-adiabatic conditions ", ASME paper number GT2007-27143, to be published in the Proceedings of Turbo Expo 2007, Montreal, Canada, 14-17 May, 2007. NB Forthcoming - Recommended at review stage for publication in the Journal of Turbomachinery.
N.R. Atkins, R. W. Ainsworth, N. W. Harvey, "Aerodynamic performance measurement in a fully scaled transient turbine test facility" ASME paper number GT2007-27142, to be published in the Proceedings of Turbo Expo 2007, Montreal, Canada, 14-17 May, 2007.
Peng, Z., New, P., Long, C.A., and Childs, P.R.N. An experimental investigation of a high radius pre-swirl cooling system. Proceedings of 8th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows. Editors X. Ottavy and I. Trebinjac, July 2-5, 2007, pp. 511-518.
Sayma, A. I., "Steady flow analysis of low pressure compression system for turbofan engines", ASME turbo expo 2007, Montreal, GT2007-27625, Canada 14-17 May 2007
Tucker P.G., Eastwood S., Xia H. and Coupland J. (2007), Large Eddy Resolving Simulations of Jet Flows for Realistic Nozzle Configurations, 13th AIAA/CEAS Aeroacoustics Conference (28th AIAA Aeroacoustics Conference), Rome, Italy, 2007, AIAA-2007-3617.
Wilson, M., Imregun, M and Sayma, A. I., (2007) "The effect of stagger variability in gas turbine fan assemblies" ASME Journal of Turbomachinery,129, 404-411
Xia H. and Qin N. (2007), Volume-filtered DES applied to an isolated synthetic jet flow, The Second Symposium on Hybrid RANS-LES Methods, June 2007, Corfu, Greece.
2006
Childs, P.R.N. Gas turbine engine internal air systems. Invited Keynote. Proceedings of the 1st International Symposium on Jet Propulsion and Power Engineering, 17th-22nd September 2006, Kunming, China, pp. 25-27.
Childs, P.R.N. Temperature Measurement Techniques. ESDU, 2002. ISBN 0856794473
Childs, P.R.N., and Pizarro, C. An Investigation of Lock Plate Flow. ASME Paper GT2006-90652, 2006.
Childs, P.R.N., Dullenkopf, K., and Bohn, D. Internal Air Systems Experimental Rig Best Practice. ASME Paper GT2006-90215, 2006.
Childs, P.R.N., Hamilton, T., Morris, R.D. and Johnston, G. Centre for technology enabled creativity. In Rothbucher, B., Kolar, M., Ion, B. and Clarke, A. (Editors) Proceedings of the 4th Engineering and Product Design Education International Conference, Salzburg, Austria, 7th-8th September, 2006, Hadleys, pp. 367-372.
Cooke, A.O., and Childs, P.R.N. An investigation into the uncertainty of turbomachinery disc heat transfer obtained via inverse analysis of temperature measurements. ASME Paper GT2006-90143, 2006.
Dixon, J., Brunton, I.L., Scanlon, T.J., Wojiechowski, G., Stefanis, V., Childs, P.R.N. Turbine Stator Well Heat Transfer and Cooling Flow Optimisation. ASME Paper GT2006-90306, 2006.
Farahani, A., and Childs, P.R.N. Nozzle Guide Vane Static Strip Seals. ASME Paper GT2006-90185, 2006.
Janke, Erik, Haselbach, Frank, Whitney, Chris, Kanjirakkad, Vasudevan, Thomas, Richard and Hodson, Howard (2006) Passive Shroud Cooling Concepts for HP Turbines: CFD Based Design Approach, Proceedings of ASME Turbo Expo 2006: Power for Land, Sea, and Air, 8-11th May, 2006, Barcelona, Spain.
Kanjirakkad, Vasudevan, Thomas, Richard, Hodson, Howard, Janke, Erik, Haselbach, Frank and Whitney, Chris (2006) Passive Shroud Cooling Concepts for HP Turbines: Experimental Investigations, Proceedings of ASME Turbo Expo 2006: Power for Land, Sea, and Air, 8-11th May, 2006, Barcelona, Spain.
Long, C. A. and Childs, P. R. N. The Effect of Inlet Conditions on the Flow and Heat Transfer in a Multiple Rotating Cavity with Axial Throughflow. Submitted to the 1stInternational Conference on Jet Propulsion and Power Engineering, 17th - 22nd September, 2006, Kunming, China.
Peng, Z., New, P., Long, C.A. and Childs, P.R.N. Operating characteristics of a high radius pre-swirl cooling system.Proceedings of the 1st International Symposium on Jet Propulsion and Power Engineering, 17th-22nd September 2006, Kunming, China, pp. 235-241.
Tucker P.G., Coupland J., Eastwood S., Xia H. and et al. (2006), Contrasting Code Performances for Computational Aeroacoustics of Jets, 12th AIAA/CEAS Aeroacoustics Conference (27th AIAA Aeroacoustics Conference), Cambridge, Massachusetts, May 8-10, 2006, AIAA paper 2006-2672.
Xia H. and Qin N. (2006), Comparison of Unsteady Laminar and DES Solutions of Synthetic Jet Flow, 24th AIAA Applied Aerodynamics Conference, San Francisco, California, June 5-8, 2006, AIAA paper 2006-3161.
2005
Qin N., Liu X., Xia H. (2005), An Efficient moving Grid Algorithm for large deformation, Modern Physics Letters B, Vol.19, pp. 1499.
X. Liu, Qin N. and Xia H. (2005), A Fast Dynamic grid Algorithm Based on Delaunay Graph, Journal of Computational Physics, Vol. 211 pp. 405-423.
Xia H. and Qin N. (2005), Detached-Eddy Simulation for Synthetic Jets with Moving Boundaries, Modern Physics Letters B Vol. 19, pp. 1429-1434.
Xia H. and Qin N. (2005), Detached-Eddy Simulation for Synthetic Jets in Cross-flows Using Dynamic Grid, CEAS/KATnet Conference on Key Aerodynamic Technologies, Bremen, 20-22 June 2005.
Xia H. and Qin N. (2005), Detached-Eddy Simulation of Synthetic Jet Flow using Dynamic Grid, RTO AVT-123 Symposium on Flow-Induced Unsteady Loads and the Impact on Military Applications, Budapest, Hungary, April 2005.
Xia H. and Qin N. (2005), Dynamic Grid and Unsteady Boundary Conditions for Synthetic Jets Flow, 43rd AIAA Aerospace Sciences Meeting and Exhibit, January 2005, AIAA Paper 2005-106.
2004
Cand, M. Sayma, A. I. and Imregun, M. "3-Dimensional Noise Propagation Using a Cartesian Grid" 10th AIAA/CEAS Aeroacoustics Conference, Manchester, U.K., May 2004, AIAA 2004-2816
Childs, P.R.N. and Stobart, R.K. (Editors). 3rd ADSC, IMechE Conference on Total Vehicle Technology, Finding the radical, implementing the practical, Professional Engineering Publishing, 2004. (309 pages) ISBN 1860584608
Childs, P.R.N. Mechanical Design. 2nd Edition, Elsevier Butterworth Heinemann 2004 (358 pages) ISBN 0750657715
Cooke, AO and Childs, PRN. Optical fiber IR thermometry and its use within gas turbines. IASME Trans., Vol. 1, pp. 551-559, 2004. ISSN 1790031X.
Long, C.A., Childs, P.R.N., Greenwood, J.R., and Tham, K.M. Manufacture and calibration of robust heat flux sensors for rotating turbomachinery. Int. Journal of Experimental Heat Transfer. Vol. 17, pp. 181-197, 2004. ISSN 08916152
Robinson, LA, Childs, PRN and Stobart, RK. Escaping the straitjacket of engineering education. In Lloyd, P at al. (Editors) The Changing Face of Design Education 2nd Int Engineering and Product Design Education Conference, TU Delft, 2004, pp. 299-306.
2003
Long, C. A., Alexiou, A. and Smout, P. D. (2003), Heat Transfer in H.P. Compressor Gas Turbine Internal Air Systems: Measurements from the Peripheral Shroud of a Rotating Cavity with Axial Throughflow. Paper No. LC1, HEFAT2003, 2nd International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 23 - 26 June 2003, Victoria Falls, Zambia
Long, C. A., Turner, A. B., Kais, G, Tham, K. M. and Verdicchio, J. A. (2003), Measurement and Prediction of the Flow within an H.P. Compressor Drive Cone. ASME Journal of Turbomachinery Vol. 125, No. 1, pp. 165-172.
Morris, R.D., Thomas, A.L., and Childs, P.R.N. Cabin and passenger environment design for the Airbus A380 - A case study for education. In Lowe, JR, Ethics in Engineering Design, Professional Engineering Press, 2003, pp. 51-58.
Tham, K. M., Long, C. A., Turner, A. B. and Dixon J. A. (2003) Computation of the Flow in a H.P. Compressor Drive Cone Cavity IGTC 2003 Conference, Tokyo, Paper No. TS-024.
2002
Atkins, R.D., Kennedy Ping, R., and Childs, P.R.N. Idea transfer and company constraints in the design of a two-seater sports car. In Stobart, R.K., and Childs, P.R.N. (Editors). Getting the Innovation back into design. Proceedings of the 2nd ADSC, IMechE Conference on Total Vehicle Technology, PEP, 2002. (Won Best Paper Award.)
Childs, P.R.N. Degree Design - Exploring Creativity from the Start. Proc. 24th SEED Annual Design Conference and 89h National Conference on Product Design Education, 2002.
Long, C. A., Turner, A. B., Kais, G, Tham, K. M. and Verdicchio, J. A. (2002), Measurement and Prediction of the Flow within an H.P. Compressor Drive Cone. Paper Number 2002-GT-30239 Proceedings of ASME Turbo Expo 2002, June 3-6, 2002, Amsterdam, The Netherlands
Ozturk, H.K., Turner, A.B. and Childs, P.R.N. The effect of labyrinth seal clearance on stator well flow and windage heating. Int. J Turbo and Jet Eng, Vol. 19 (4), pp. 219-231, 2002.
Smout, P.D., Chew, J., and Childs, P.R.N. ICAS-GT a European collaborative research program on internal cooling systems for gas turbines. ASME Paper GT-2002-30479.
Stobart, R.K., and Childs, P.R.N. (Editors). Getting the Innovation back into design. Proceedings of the 2nd ADSC, IMechE Conference on Total Vehicle Technology, PEP, 2002. (243 pages)
Tang D. and Xia H. (2002), Nonlinear Evolution Analysis of T-S Disturbance Wave at Finite Amplitude in Nonparallel Boundary Layers, Applied Mathematics and Mechanics, Vol. 23, No. 6, pp. 660-669.
Xia H. and Tang D. (2002), A Detailed Nonparallel Stability Analysis Using Parabolic Stability Equations, CFD Journal, Vol. 10, No. 4.
Xia H., Tang D. and Lu C. (2002), Nonparallel Stability Analysis Of Three Dimensional Disturbance Wave In Boundary Layers, Acta Mechanica Sinica, Vol. 34, No. 5.
2001
Childs, P.R.N. Advances in Temperature Measurement. Advances in Heat Transfer, Vol. 36, pp 111-181, AIP, 2001. Invited paper.
Alexiou, A., Long, C. A., Turner, A. B. and Barnes, C. J. 2001, Thermal Modelling of a Rotating Cavity Rig to Simulate the Internal Air System of a Gas Turbine H.P. Compressor, Proccedings of the 5th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, Thessaloniki, Greece Vol. 3, pp. 2387-2392.
Childs, P.R.N. Practical Temperature Measurement. Butterworth Heinemann, 2001. ISBN 075065080X.
Childs, P.R.N., and Stobart, R.K. (Editors). Total Vehicle Technology, Professional Engineering Publications (PEP), 2001.
Childs, P.R.N., Downie, J., Katz, T. Design models and their value in education. In Edwards, K.L., and Brodhurst, E.K. (Eds.), Proc. 23rd SEED Annual Design Conference and 8th National Conference on Product Design Education, 2001, pp. 179-186.
Hills, N.J., Chew, J.W. and Turner, A.B. Computational and mathematical modelling of turbine rim seal ingestion. ASME Paper 2001-GT-0204.
K P, Vasudevan, J, Dey and A, Prabhu (2001), Spot propagation characteristics in laterally strained boundary layers, Experiments in Fluids, 30 (5). pp. 488-491. ISSN 0723-4864
Long, C. A. and Alexiou, A. 2001, Heat Transfer in H.P. Compressor Internal Air Systems: a Rotating Disc-Cone cavity with Axial Throughflow, Proccedings Congrès Français de Thermique, SFT 2001, Nantes, pp. 807-812.
Milburn, C., and Childs, P.R.N. Styling and branding. In Total Vehicle Technology, Professional Engineering Publications (PEP), pp. 275-287, 2001.
2000
Childs, P.R.N., Greenwood, J.R., Long, C.A. 'Review of Temperature measurement'. Review of Scientific Instruments, Vol. 71, pp. 2959-2978, 2000. (Invited review paper)
Alexiou, A., Hills, N. J., Long, C. A., Turner, A. B. and Millward, J. A. 2000, Heat Transfer in H.P. Compressor Gas Turbine Internal Air Systems: a Rotating Disc-Cone Cavity with Axial Throughflow. International Journal for Experimental Heat Transfer. Vol. 13, No. 4, pp. 299-328.
Alexiou, A., Hills, N. J., Long, C. A., Turner, A. B., Wong, L - S and Millward, J. A. 2000, Discharge Coefficients for Flow Through Holes Normal to a Rotating Shaft.International Journal of Heat and Fluid Flow, Vol. 21, pp. 701-709.
Childs, P.R.N., and Brodhurst, E.K. (Editors). Engineering Design Education EDE 2000, Professional Engineering Publications (PEP), 2000. ISBN 1860582656.
K P, Vasudevan and J, Dey (2000), Transition zone in constant pressure converging flows, Current Science, 79 (6). pp. 821-828. ISSN 0011-3891
Long, C. A., Alexiou, A., Hills, N. J., Turner, A. B. and Millward, J. A. Heat Transfer in a Rotating Disc-Cone Cavity with Axial Throughflow. Proceedings of the 8thInternational Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC-8, Honolulu, Hawaii, March 2000, Vol. 2, pp. 698-705.
Ozturk, H.K., Turner, A.B., Childs, P.R.N., Bayley, F.J. Stator well flows in axial compressors. Proc. International Journal of Heat and Fluid Flow, Vol. 21, pp. 710-716, 2000.
Scott, R.M., Childs, P.R.N., Hills, N.J., Millward, J.A., 2000. 'Radial inflow into the downstream cavity of a compressor stator well'. ASME Paper 2000-GT-0507.
Simons, R.W., Childs, P.R.N., 2000. 'Estimating in Engineering Design'. In Childs, P.R.N. (Editor), Integrating Design Education Beyond 2000. PEP, 2000, pp.261-266.
Turner, A.B., Davies, S.J., Childs, P.R.N., Harvey, C.G., Millward, J.A. 'Development of a novel gas turbine driven centrifugal compressor'. Proceedings of the Institution of Mechanical Engineers, Part A, Journal of Power and Energy, Vol. 214, Part A, pp. 423-437, 2000.
1999
Childs, P.R.N., Greenwood, J.R., Long, C.A. 'Heat flux measurement techniques'. Proc. I.Mech.E., Journal of Mechanical Engineering Science. Vol. 213, pp. 655-677, 1999.
Childs, P.R.N., Noronha, M.B., 1999. 'The impact of machining techniques on centrifugal compressor impeller performance'. Trans. ASME, Journal of Turbomachinery. Vol. 121, pp. 637-643, 1999. This paper was the subject of the 1999 J.P. Davis IGTI/ASME (International Gas Turbine Institute/American Society of Mechanical Engineers) award for exceptional contribution to the literature on Turbomachinery.
Childs, P.R.N., Simons, R.W., 1999. 'Small Priced Tools and Equipment'. The Continuum of Design Education, Proc. 21st SEED Annual Design Conference and 6thNational Conference on Product Design Education, pp275-278. ISBN 1860582087.
Greenwood, J.R., Childs, P.R.N., Chaloner, P. 'Gold leads to PRTs for monitoring high temperatures'. Gold Bulletin, Vol. 32(3), pp. 85-89, 1999.
Jackson, R.A., Peyton-Jones, J.C., Pan, J., Roberts, J.B., Childs, P.R.N. Chemical aspects of the dynamic performance of a three-way catalyst. SAE Paper 1999-01-0312, March, 1999.
Long, C. A. Essential Heat Transfer (1999), Addison Wesley Longman, London.
Vasudevan, K P, Dey, J and Prabhu, A (1999), Transition Zone in a Constant Pressure Converging Flow, Proceedings of the 8th Asian congress of fluid mechanics. International Academic Publishers, Beijing, China, pp. 792-794. ISBN 7800034593
Xia H., Tang D. and Lu C. (2001), Studies of Nonparallel Stability of Boundary Layer, Acta Aerodynamica Sinica, Vol. 19, No. 2.
1998
Childs, P.R.N. Mechanical Design. Arnold, 1998. ISBN 0340692367. Reprinted 1999, 2001, 2002. (231 pages).
Ozturk, H.K., Childs, P.R.N., Turner, A.B., Hannis, J.M., Turner, J.R., 1998. 'A three dimensional computational study of windage heating within an axial compressor stator well'. ASME Paper 98-GT-119, ASME IGTI Aeroengine Congress, Stockholm. (8 pages).
Tucker, P. G. and Long, C. A. 1998. Fluid Temperature distribution in a rotating cavity with an axial throughflow. Int. Comm. Heat Mass Transfer, Vol. 25, No. 4, pp. 511-520.
Turner, M. T., Long, C. A. and Chew, J. W. 1998. Experimental investigation and mathematical modelling of clearance brush seals. ASME Journal of Turbomachinery Vol. 120, No. 3, pp. 573-579.
1997
Bayley, F.J., Childs, P.R.N. 'Prediction of ingress rates to turbine and compressor wheelspaces'. International Journal of Heat and Fluid Flow, Vol. 18, No. 2, pp. 218-228, 1997
Bayley, F.J., Childs, P.R.N., 1997. 'Calculation of hot gas ingress and egress rates in turbo-machine wheelspaces'. 2nd European Conference on Turbomachinery - Fluid Dynamics and Thermodynamics, Antwerp, Proceedings, pp. 521-528.
Childs, P.R.N., Noronha, M.B., 1997. 'The impact of machining techniques on centrifugal compressor impeller performance'. American Society of Mechanical Engineers, ASME Paper 97-GT-456. (8 pages).
Hills, N.J., Green, T., Turner, A.B. and Chew, J.W. Aerodynamics of turbine rim seal ingestion. ASME Paper 97-GT-268, 1997.
Long, C. A., Morse, A. P. and Tucker, P. G. 1997. Measurement and computation of heat transfer in high pressure compressor drum geometries with axial throughflow. ASME Journal of Turbomachinery Vol. 119, pp. 51-60.
Ozturk, H.K., Childs, P.R.N., Turner, A.B., 1997. 'Numerical solution of flow and heat transfer in axial compressor stator wells'. Institution of Chemical Engineers, IChemE 5th UK National Heat Transfer Conference. (8 pages.)
Ozturk, H.K., Turner, A.B., Childs, P.R.N., 1997. 'Numerical prediction of axial compressor stator well flows'. International Centre for Heat and Mass Transfer, International Symposium on Advances in Computational Heat Transfer, Cesme, Izmir, Turkey, May 26th - 30th, 1997. (8 pages).
Turner, A.B., Long, C.A., Childs, P.R.N., Hills, N.J., Millward, J.A., 1997. 'A review of some current problems in gas turbine internal air systems'. American Society of Mechanical Engineers, ASME Paper 97-GT-325, ASME Aeroengine Congress, Orlando, Florida. (8 pages).
Turner, M. T., Long, C. A. and Chew, J. W. 1997. Experimental investigation and mathematical modelling of clearance brush seals. Presented at the 42nd ASME International Gas Turbine Conference, Orlando, Florida, June 1997, paper No. 97-GT-282.
1996
Childs, P.R.N., Long, C.A. 'A review of forced convective heat transfer in stationary and rotating annuli', Proceedings of the Institution of Mechanical Engineers, Journal of Mechanical Engineering Science, Vol. 210, pp. 123-134, 1996.
Long, C. A. and Rogers, M. 1996. Temperature prediction for surfaces exposed to flare radiation and attenuation of radiative fluxes by water curtain. Presented at the 5th International Conference Offshore Structures - Hazard & Integrity Management, London, December 1996, Paper 4.2 (13 pages).
Tucker, P. G. and Long, C. A. 1996. Numerical investigation into influence of geometry on flow in a rotating cavity with an axial throughflow. Int. Comm. Heat Mass Transfer, Vol. 23, No. 3, pp. 335-344.
Tucker, P. G. and Long, C. A. 1996. Semi-implicit second order finite volume jet stream computations. Int. J. num. Meth. Heat Fluid Flow, Vol. 6, No. 6, pp. 39-50.
1995
Childs, P.R.N., Long, C.A., 1995. 'A review of convective heat transfer in open and closed rotating annular cavities'. IMechE Conference Transactions, 4th UK National Conference on Heat Transfer, Paper C510/084/95, pp. 67-71.
Long, C. A. and Marras, Y. 1995. Contact force measurements under a brush seal. Presented at the 40th ASME International Gas Turbine Conference, Houston, Texas, June 1995, paper No. 95-GT-211.
Long, C. A., Morse, A. P. and Tucker, P. G. 1995. Measurement and computation of heat transfer in high pressure compressor drum geometries with axial throughflow. Presented at the 40th ASME International Gas Turbine Conference, Houston, Texas, June 1995, paper No. 95-GT-185.
Long, C. A., Morse, A. P. and Zafiropoulous, N. 1995. Buoyancy-affected flow and heat transfer in asymmetrically-heated rotating cavities. ASME Journal of Turbomachinery Vol. 117, pp. 461-473.
Tucker, P. G. and Long, C. A. 1995. CFD Prediction of vortex breakdown in a rotating cavity with an axial throughflow of air. International Communications in Heat and Mass Transfer, Vol. 22, No. 5, pp. 639-648.
1994
Bayley, F.J., Childs, P.R.N., 1994. 'Air temperature rises in compressor and turbine stator wells'. American Society of Mechanical Engineers, ASME Paper 94-GT-185. (8 pages)
Chew, J.W., Green, T. and Turner, A.B. Rim sealing of rotor-stator wheelspaces in the presence of external flow. ASME Paper 94-GT-126, 1994.
Childs, P.R.N., Turner, A.B., 1994. 'Heat transfer on the surface on the surface of a cylinder rotating in an annulus at high axial and rotational Reynolds number'. Proc. 10th International Heat Transfer Conference, Brighton, UK, Vol. 3, pp. 13-18.
Kais, G. Long, C. A. and Tucker, P. G. 1994. Flow and Heat Transfer in Rotating Cavities with Axial Throughflow. Paper 8-IC-13, Proceedings of the 10th International Heat Transfer Conference, Brighton, U. K. August 1994, Vol. 4, pp 253-259.
Long, C. A. 1994. Disc Heat Transfer in a Rotating Cavity with an axial Throughflow of Cooling Air. International Journal of Heat and Fluid Flow, Vol.15, pp. 307-316. (J)
Long, C. A., and Tucker, P. G. 1994. Numerical computation of laminar flow in a heated rotating cavity with an axial throughflow of air. International Journal of Numerical Methods for Heat and Fluid Flow Vol. 4, pp. 347-365.
Long, C.A. and Tucker, P. G. 1994. Shroud heat transfer measurements from a rotating cavity with an axial throughflow of air. ASME Journal of Turbomachinery Vol. 116, pp. 525-534.
1993
Bayley, F. J. and Long, C.A. 1993. A combined experimental and theoretical study of flow and pressure distributions in a brush seal. ASME Journal of Engineering for Gas Turbines and Power, Vol. 115, pp.404-410.
Bayley, F. J., Long, C. A. and Turner, A. B. 1993. Discs and drums: the thermo-fluid dynamics of rotating surfaces. IMechE Journal of Mechanical Engineering Science, Vol. 207, pp.73-81.
Long, C. A., Morse, A. P. and Zafiropoulous, N. 1993. Buoyancy-affected flow and heat transfer in asymmetrically-heated rotating cavities. Presented at the 38th ASME International Gas Turbine Conference, Cincinnati, Ohio, June 1993, paper No. 93-GT-88.
1992
Bayley, F. J. and Long, C.A. 1992. A combined experimental and theoretical study of flow and pressure distributions in a brush seal. Presented at the 37th ASME International Gas Turbine Conference, Cologne, Germany, June 1992, paper No. 92-GT-355.
Black, J. D. and Long, C. A. 1992. Rotational CARS measurements in a rotating cavity with axial throughflow of cooling air: oxygen concentration measurements. Applied Optics, Vol. 31, No.21, pp. 4291-4297.
Chew, J.W., Dadkhah, S. and Turner, A.B. Rim sealing of rotor-stator wheelspaces in the absence of external flow. Trans. ASME, Journal of Turbomachinery, Vol. 114, pp. 433-438, 1992.
Childs, P.R.N., Rayner, D., Turner, A.B., 1992. 'Heat transfer to a cylindrical drum rotating in an annulus under a single stator blade row'. International Centre for Heat and Mass Transfer, International Symposium, Heat Transfer in Turbomachinery, Athens, Greece. (12 pages). Proceedings of the 1992 International Symposium on Heat Transfer in Turbomachinery. Edited by: R. J. Goldstein
Childs, P.R.N., Turner, A.B., Vaughan, C.M., Rayner, D., Bayley, F.J., 1992. 'Heat transfer to a rotating drum in an annulus with a stator blade row and axial throughflow'. American Society of Mechanical Engineers, ASME Paper 92-GT-249. (8 pages),D. E. Metzger, A. I. Leontiev, 1995, 591 pages ISBN: 1-56700-016-9
Dadkhah, S., Turner, A.B. and Chew, J.W. Performance of radial clearance rim seals in upstream and downstream rotor-stator wheelspaces. Trans. ASME, Journal of Turbomachinery, Vol. 114, pp. 439-445, 1992.
Farthing, P. R., Long, C. A., Owen, J. M. and Pincombe, J. R. 1992. Rotating cavity with axial throughflow of cooling air: heat transfer. ASME Journal of Turbomachinery, Vol. 114, pp.229-236.
Farthing, P. R., Long, C. A., Owen, J. M. and Pincombe, J. R. 1992. Rotating cavity with axial throughflow of cooling air: flow structure. ASME Journal of Turbomachinery, Vol. 114, pp.237-246.
Green, T. and Turner, A.B. Ingestion into the upstream wheelspace of an axial turbine stage. ASME Paper 92-GT-303, 1992.
Long, C.A. and Tucker, P. G. 1992. Shroud heat transfer measurements from a rotating cavity with an axial throughflow of air. Presented at the 37th ASME International Gas Turbine Conference, Cologne, Germany, June 1992, paper No. 92-GT-69.
Rayner, D., Vaughan, C.M., Childs, P.R.N., Turner, A.B., 1992. 'Numerical simulation of the heat transfer in turbulent, swirling annular flows'. Advanced Computational Methods in Heat Transfer II, Vol. 2, Ch 43, pp. 511-531, Natural/Force Convection and Combustion Simulation.
Tucker, P. G. and Long, C. A. 1992. A finite element analysis of compressor disc heat transfer using the transient conduction method with sparse boundary collocation points. Presented at the Heat Transfer 92 Conference, Milan Italy, July 1992. Published in Proc. 2nd Int. Conf. on Advanced Methods in Heat Transfer, Vol. 1, pp. 409-432.
1991
Farthing, P. R., Long, C. A. and Rogers, R. H. 1991. Measurements and prediction of heat transfer from compressor discs with a radial inflow of cooling air. 36th ASME International Gas Turbine Conference, Orlando, Florida, U.S.A. Paper No. 91-GT-53
Long, C. A. 1991. A Calibration Technique for Thermopile Heat-flux Gauges. Proceedings of Sensor 91Conference, Nuremberg, Germany. Vol. IV, Paper No. B12.2, pp.247-262.
1990
Farthing, P. R., Long, C. A., Owen, J. M. and Pincombe, J. R. 1990. Rotating cavity with axial throughflow of cooling air: heat transfer. 35th ASME International Gas Turbine Conference, Brussels. Paper No. 90-GT-16
Farthing, P. R., Long, C. A., Owen, J. M. and Pincombe, J. R. 1990. Rotating cavity with axial throughflow of cooling air: flow structure. 35th ASME International Gas Turbine Conference, Brussels. Paper No. 90-GT-17
1989
Morse, A.P. Assessment of laminar-turbulent transition in closed disc geometries. ASME Paper 89-GT-179, 1989.
Owen, J.M. and Rogers, R.H. Flow and heat transfer in rotating-disc systems. Volume 1 Rotor-stator systems. Research Studies Press, 1989.
1988
Chew, J.W. and Vaughan, C.M. Numerical predictions for the flow induced by an enclosed rotating disc. ASME Paper 88-GT-127, 1988.
Owen, J.M. An approximate solution for the flow between a rotating and a stationary disc. ASME Paper 88-GT-293, 1988.
Phadke, U.P. and Owen, J.M. Aerodynamic aspects of the sealing of gas turbine rotor-stator systems. Part 1: The behaviour of simple shrouded rotating disc systems in a quiescent environment. Int. J. Heat and Fluid Flow, Vol. 9, pp. 98-105, 1988.
Phadke, U.P. and Owen, J.M. Aerodynamic aspects of the sealing of gas turbine rotor-stator systems. Part 2: The performance of simple seals in a quasi-axisymmetric external flow. Int. J. Heat and Fluid Flow, Vol. 9, pp. 106-112, 1988.
Phadke, U.P. and Owen, J.M. Aerodynamic aspects of the sealing of gas turbine rotor-stator systems. Part 3: The effect of non-axisymmetric external flow on seal performance. Int. J. Heat and Fluid Flow, Vol. 9, pp. 113-117, 1988.
1986
Firouzian, M., Owen, J.M., Pincombe, J.R. and Rogers, R.H. Flow and heat transfer in a rotating cavity with a reaila inflow of fluid. Part 2. Velocity, pressure and heat transfer measurements. Int. J. Heat and Fluid Flow, Vol. 7, pp. 21-, 1986.
Long, C. A. and Owen, J. M. 1986. The effect of inlet conditions on heat transfer in a rotating cavity with a radial outflow of fluid. 31st ASME International Gas Turbine Conference, Düsseldorf. Paper No. 86-GT-95.
Long, C. A. and Owen, J. M. 1986. The effect of inlet conditions on heat transfer in a rotating cavity with a radial outflow of fluid. ASME